| A continuación se muestra una lista de pistas para este lanzamiento. |
| Lado y pista | Pista y artista | Longitud |
|---|
| A1 | Workshop door opened | 0.04 |
| A2 | Workshop door closed | 0.04 |
| A3 | Tool box opened | 0.07 |
| A4 | Tool box closed | 0.04 |
| A5 | Tools removed from box and put on bench | 0.29 |
| A6 | Hand-drill removed from toolbox | 0.03 |
| A7 | Spanner removed from toolbox | 0.04 |
| A8 | Screwdriver removed from toolbox | 0.03 |
| A9 | Chisel hammered with mallet | 0.02 |
| A10 | Chisel hammered and wood levered up | 0.15 |
| A11 | Glass hamered from smashed front door pane, surround levered up | 0.48 |
| A12 | Tack nail hammered | 0.11 |
| A13 | Tack nail hammered | 0.10 |
| A14 | Tack nail hammered | 0.08 |
| A15 | Large tack nail hammered | 0.09 |
| A16 | Tack miss-hit twice and then hammered in | 0.12 |
| A17 | Floor nail hammered (slow rhythm with hammer ring) | 0.15 |
| A18 | Floor nail hammered (faster rhythm with hammer ring) | 0.10 |
| A19 | Floor nail hammered (changing rhythm with hammer ring) | 0.09 |
| A20 | Small nails dropped on bench | 0.01 |
| A21 | Small nails dropped on bench, one falls on metal surface | 0.03 |
| A22 | Tenon saw, small piece of wood (steady rhythm) | 0.17 |
| A23 | Tenon saw, small piece of wood (variable rhythm) | 0.17 |
| A24 | Tenon saw, small piece of wood (close perspective) | 0.19 |
| A25 | Hand saw through sheet of plywood (saw jams on some strokes) | 0.25 |
| A26 | Hacksaw, small piece of Formica | 0.13 |
| A27 | Hacksaw, small piece of Formica (cut piece falls on floor) | 0.20 |
| A28 | Hacksaw, piece of metal cut piece falls on floor | 0.47 |
| A29 | File, wood | 0.35 |
| A30 | File, Formica (with squealing on some strokes) | 0.39 |
| A31 | File, metal | 0.32 |
| A32 | Planing, piece of wood | 0.44 |
| A33 | Sanding, small piece of wood | 0.58 |
| A34 | Sanding, paper folded then small piece of wood | 0.42 |
| A35 | Sanding, paper folded then sheet of plywood | 1.27 |
| A36 | Sanding, edge of plywood | 0.55 |
| A37 | Sanding, sheet of metal | 0.50 |
| A38 | Chiselling wood (splintering noise) | 1.21 |
| A39 | Nail pulled | 0.02 |
| A40 | Nail pulled | 0.03 |
| A41 | Nail pulled | 0.02 |
| A42 | Nail pulled | 0.02 |
| A43 | Hood levered with chisel, splinters | 0.28 |
| A44 | Chisel sharpened on grindstone | 0.58 |
| A45 | Hand-drill, 2 holes in wood | 0.16 |
| A46 | Hand-drill, single hole in wood | 0.07 |
| A47 | Hand-drill, single hole in metal | 0.18 |
| A48 | Hand-drill, single hole in metal, jams, is freed | 0.19 |
| A49 | Small spanner dropped | 0.01 |
| A50 | Large spanner dropped | 0.02 |
| A51 | Paining, brush | 2.57 |
| A52 | Painting, roller | 3.12 |
| A53 | Can of spray paint shaken | 0.49 |
| A54 | Spray painting | 1.26 |
| A55 | Engine hoist assembled (metal clattering noise) | 0.44 |
| A56 | Electric drill, short burst freewheeling | 0.03 |
| A57 | Electric drill, single hole in wood | 0.11 |
| A58 | Electric drill, single hole in wood, jams, is freed | 0.16 |
| A59 | Electric drill, single hole in metal sheet | 0.12 |
| A60 | Electric drill, single hole in thich metal bar | 0.30 |
| A61 | Electric drill, rotary sanding attachment used on plywood sheet | 2.23 |
| A62 | Electric jigsaw, small piece of wood | 0.20 |
| A63 | Electric jigsaw, plywood sheet | 1.14 |
| A64 | Electric grinder, freewheels | 0.14 |
| A65 | Electric grinder, short burst on metal sheet | 0.08 |
| A66 | Electric grinder, long bursts on metal sheet | 1.07 |
| A67 | Pressure hose, cleaning yard | 3.14 |
| A68 | Arc welding machine, switch on, transformer hum in standby mode, off | 1.51 |
| A69 | Arc welding machine, switch on, weld, lose arc, restrike, weld, off | 0.50 |
| A70 | Arc welding machine, switch on, weld, off | 0.36 |
| A71 | Arc welding machine, switch on, strike arc second attempt, weld, off | 0.38 |
| A72 | Arc welding machine, switch on, attempt to strike arc, fail, switch off | 0.59 |
| A73 | Gas blowlamp lit, constant roar of flame, off | 2.04 |
| A74 | Gas blowlamp lit, used to heat surface (changing acoustic), off | 3.32 |
| A75 | Anvil, metal hammered hard by blacksmith (last stroke) | 3.07 |
| A76 | Pneumatic drill used on tarmac | 3.07 |
| A77 | General atmosphere on building site, mid distant acoustic, starts with dumper truck passing | 4.47 |
| A78 | General atmosphere on building site, closer perspective, steel girders cut | 5.45 |
| A79 | Building site, interior acoustic of building under construction with bricklayers in foreground | 3.55 |
| A80 | Building site, hammering steel girders (close perspective) | 1.39 |
| A81 | Building site, concrete aerator used to remove air bubbles rom liquid concrete (close perspective) | 1.11 |
| Longitud total de los medios 1:10:31. |
Main menu
BBC SFX - BBCCD SFX043
